Differences

This shows you the differences between two versions of the page.

--- hardware:guides:ssh_ilo4 [2026/07/20 14:37] – fabricio
+++ hardware:guides:ssh_ilo4 [2026/07/20 14:38] (current) – fabricio
@@ Line 1: / Line 1: @@
 ====== Infrastructure Credentials: HPE iLO 4 ======
-This page tracks the local management and IPMI credentials for the server infrastructure hardware.
-===== Active iLO User Accounts =====
-The following matrix documents the active administrative accounts on the **HP ProLiant ML350p Gen8** system board.
-^ Device / Host ^ Component ^ User ID ^ Username ^ Access Level ^ Status / Notes ^
-| strg2 | iLO 4 Web/SSH | ID 1 | ''Administrator'' | Full Administrator | **ACTIVE** - Primary Management Account |
-| strg2 | iLO 4 Web/SSH | ID 2 | ''admin'' | Full Administrator | **DISABLED** - Leftover legacy account from replacement board |
-| strg2 | iLO 4 Web/SSH | ID 3 | ''--'' | -- | **EMPTY** - Available for emergency provisioning |
----
 ===== ⚠️ Core Password Governance Rules =====
@@ Line 20: / Line 8: @@
   * **Strict Length Limit:** Passwords **MUST** be between **8 and 20 characters** in length. The underlying IPMI protocol silently truncates anything past 20 characters, which causes a silent mismatch that locks users out of the Web Dashboard.
   * **Character Requirements:** Passwords must contain a mix of uppercase letters, lowercase letters, and numeric digits.
   * **The Special Character Limitation:** If utilizing symbols (such as ''!'', ''$'', or ''*''), the password must be injected via the local host CLI using **single quotes (`'...'`)** to prevent Linux Bash history expansion from corrupting the string.
-> **Best Practice:** To set a password longer than 20 characters or one with highly complex symbols, first assign a simple temporary alphanumeric password via the local terminal to gain entry, then perform the final password update directly inside the iLO 4 Web UI settings page.
 ---