This is an old revision of the document!
To-Do
- basel.lan (former strg2).
- Longer cable for adding HDD cage + RAID controller
- add proper password
- setup via Ansible
- dl2
- Set up OS;
- Check power usage
Log
Sep 01, 2025
- DL2: Added heatsink to SSD
- DL2: Added SSD (512GB) for OS.
- Basel: Added all available 4GB Ram sticks (56GB)
- Basel: Added second CPU
- Basel: Set up SoftRaid1 for Ubuntu Server 24.04 LTS (separate RAID1 for boot/root/swap) on two 1GB HDDs. Note: Only good tutorial at https://www.youtube.com/watch?v=QQKMlRsEWRE
Aug 26, 2025
- All RAM sticks (DDR3) that fit into 'basel' were tested without finding a failure.
Aug 12, 2025
- Added the 1TB 980 PRO NVME M.2 SSD to the DL2. (Note: From patrick, currently not used). Note: It has no heatsink right now.
Aug 11, 2025
- Set up Laptop in server room for maintenance → passphrases available in Bitwarden
- Testing out 4GB RAM sticks using Ubuntus 'memchecker'
Aug 08, 2025
- Moved RAID Cache from the open/broken HPE ProLiant ML350p to the strg2.
- SSD 128GB SATA MZ7KE128 can not be combined with the two `10K SAS 300GB 653955` in a cage. The RAID controller doesn't allow selecting them together for a logical unit.